Shopping Cart (0)
Call Us: 800.342.5335
Electronic Development Laboratories, Inc.
EDL's Seven Decade Legacy
Fire Service Products
Custom Engineered Sensors
Accessories and Replacement Parts
Tire & Rubber
Comparison Cryostat Calibrator
Dry Well Calibrators
Liquid Bath Calibrators
Care and Maintenance
Frequently Asked Questions
Nervo-Scope Repair Form
EDL Catalog 2018
Compression Fittings Catalog
Wireless Analagraph Brochure
> 4" Aluminum Block - STS Surface Transfer Standard Calibrator / Verification Station
4" ALUMINUM BLOCK - STS Surface Transfer Standard Calibrator
4" Aluminum Block - STS Surface Transfer Standard Calibrator / Verification Station
True Accurate Surface Temperatures at an Affordable Price!
Offers A Large 4" Testing Area!
Ambient to 350 °C (662 °F)
Put me on the Waiting List
Add to Cart
Product Data Sheet
NEW --- Surface Sensor Verification Station/Calibrator with 4" Aluminum Block -
Easily Calibrate Surface Sensors with the newest EDL STS Surface Transfer Standard!
You don't have to be an engineer to use EDL's STS calibrators. Our easy to use units come pre-programmed and offer an RS-232 computer interface and I-Tools. Now available with a 4" Aluminum Block, for the easiest testing possible for virtually any Surface Style Sensor. These verification stations/calibrators are small enough to use on the floor or in the lab. Available for purchase separately, or in the Reference System.
The new 4" Block STS is available in both 110Vac and 220Vac versions. These units are often used right on the production floor to verify sensors before, during, and after a shift. These instruments allow you to remove doubt from your measurements. Weighing only 16 lbs. (with an Aluminum block/Brass blocks will weigh more), the STS line is easily transported. The new 4" diameter Aluminum block gives ample surface area for calibrations of surface sensors up to the maximum temperature of the calibrator. With the improved surface area, the life of the block is greatly extended and gives the user more room to test.
These lightweight, easy to use calibrators are guaranteed to perform better than the larger, more expensive dry-wells available on the market. These units feature stability of <±0.05 °C with temperatures as high as 350 °C. All EDL calibrators include a NIST-traceable calibration certificate. The STS line is ideal for sensors, digital thermometers, dial gauges, and bulb switches. All data is easily collected and downloaded to the computer through the RS-232 computer interface which allows computer control of the set points for automatic testing. EDL's calibrators are economical, easy to use, and compact they are the number one choice for surface calibrators on the market today.
When trust in measurement matters, count on EDL.
Surface Transfer Standard Calibrator with 4" Block:
4" Aluminum Block
**Drilled to Accommodate 3/16" (0.1875") Reference Probe**
Temperature Range: Ambient to 350 °C
Size: 30.4cm (12") x 25.4cm (10") x 34.6cm (14")
Weight: 11 kg (25 lbs.)
Stability: 0.05 °C (over 30 minute period)
Resolution: 0.1 °C
Accuracy: ± 2.0 °C
Uniformity: ± 0.5 °C
Fast Cool: 200 °C in ~ 40 minutes
100 °C in ~ 10 minutes
300 °C in ~ 20 minutes
Power: 110VAC, 10 amp, 50/60Hz
RS-232 Computer Interface
E-Z Probe® - Food & Beverage Temperature Kit
STS Surface Transfer Standard Calibrator
Cryo-Cal-1® Comparison Calibrator
FUR-1500 Ultra High Temperature Calibration Furnace
Browse Similar Items
Browse By Category