Hot New Products!

Microprocessor Instrument Ultra Pyrometer	Ultra Bath stirred liquid	Calibration Furnace for 1200°C	STS surface calibrator	STS Self contained	Salt Bath
Mini Ultra Bath	Dual Infrared Calibrator	Practi-Cal dry well calibrator	Platinum Reference sensors	Cryo-Cal cryogenic calibrator	Acu-Therm RS232
Dual Channel pyrometer	Accu-Therm Data Collection Unit	T-Val Portable Onsite calibrator	High temperature wire lugs	Chromalux Products	Cryo-Cal-ll Cryogenic cryostat
Mini Salt Bath	MegaOhm Validator

Microprocessor based reference thermocouple Instrument

The only hand held reference instrument that accepts all eight ASTM accepted thermocouples including type C.

This Two channel High accuracy instrument has an internal cold junction reference with an accuracy of better than 0.1°C, or an external cold junction reference. This allows you to use the instrument in the field or the lab. Features include a computer interface running at 19 200 baud for downloading time stamped data, displays temperature in K, °C, °F, & Mv with resolutions of 1, 0.1, and 0.01, Min/Max, and differential readings.

Click image to be directed to data page.

MegaOhm Validator

This low cost device allows you to verify the accuracy of your insulation resistance testers with confidence.

Click image to be directed to data page.

MSB-500

Table top Mini Salt Bath

The MSB-500 is the only miniaturized Salt bath in the world! It has a range from 200ºC to 500ºC with an accuracy of ±10mK.

Built in Over temp safety, automatic stirring lockout, and removable RTD for external calibration. Simple easy to use touchscreen interface, plus it can can be plugged into any computer with RS232 capability.

EDL ULTRA-BATH

The first bath of the 21st century.

The New EDL ULTRA-BATH is the first stirred liquid bath designed and built for ease of use. It features low uncertainty, high stability and uniformity with optional full 21CFR part 11 compliance.

Plus a full line of Silicone fluids at Sizzling prices.

High temperature calibration furnace - - FUR1200

This high temperature calibration furnace operates over the range of 300°C to 1200°C and features fast heat up, extremely good stability ,and high accuracy.

Surface Transfer Standard - - STS

The STS bridges the gap of traceability for Surface Temperature measurements.

Surface Transfer Standard - Self Contained

STS-SC

This is the second generation of the STS (surface transfer standard). The STS-SC is fully self contained with a built in controller and internal heat source. There is a reference thermocouple output and an RS-232 port for computer communication.

Stirred salt baths

Salt Bath

The Ultra Bath 2050 uses Salt as the stirred liquid media and is packed full of features not found on any other bath on the market.

Mini Ultra bath

This new Touch screen Mini Ultra Bath is designed for high accuracy calibrations where a larger full featured stirred liquid bath could not be used. Stabilities of better than 0.020°C can be easily achieved.

Easy to use, GUI.

Infrared Calibrator

Dual Black body calibrator

Two zone Black body infrared calibrator features high accuracy. Each zone is independently controlled; the hot zone is for operation from ambient to +350°C, and the cold zone is for -20°C to 130°C.

ALSO available with the hot side capable of 650ºC.

Practi-Cal®

Industrial surface and dry well temperature Calibrator

The Practi-Cal® industrial surface temperature calibrator is your solution to temperature calibration in a manufacturing environment. Functionality, features, and reasonable cost make the Practical the obvious choice in temperature calibrators.

EDL Type S Reference Sensors EDL Platinum Reference Thermocouples

Offered for use from 0°C to 1450°C and for short-term intermittent measurements up to 1700°C, designed and built to be used as precision standards.

Cryo-Cal-ll

Cryogenic Cryostat

The Cryo-Cal-ll allows you to easily and inexpensively produce stable and reliable temperatures from -196°C to +10°C.

Cryo-Cal®

Cryogenic Calibrator

The EDL Cryo-Cal® is an affordable alternative to both the Argon triple point and other similar cryogenic calibrators.

Accu-Therm RS232
The multi channel Accu-Therm with RS232 interface is housed in a waterproof case and is ideal for all applications where you need a high quality instrument that can easily be interfaced to a computer without requiring lengthy programming.

Dual Channel Pyrometer
The Dual Channel Pyrometer gives you two fully functional independent instruments in one case. All of the operating controls are easily accessed and the cover has convenient sensor storage.

Acu-Therm Data Collection Unit

Monitors up to 20 channels of temperature measurement data, with 24 hour battery backup. Easy to use RS232 download to computer. Redundant memory for data logging. Waterproof and shock proof case for harsh environments.

This Data Logger is fully programmable and has an Isothermal input system that reduces cold end error to under 0.10°C over its full operating range.

T-Val

Portable AC powered calibrator with moveable hot zone. Calibrated hot zone can be located up to 200 feet from base calibrator.

High Temperature wire lugs

These are heavy stranded Nichrome wire with ceramic insulators and Nickel lugs and butt splices, designed for extremely high temperature wiring applications.

Gold plated lugs for RTD's and SPRT's.

Chromalux controls
The full line of Chromalux controls will be available shortly.