Call Us: 800.342.5335
Electronic Development Laboratories, Inc.
FUR-1200 High Temperature Calibration Furnace

FUR-1200 High Temperature Calibration Furnace

Your Price: $21,115.00
Part Number:FUR-1200
  • Economical Furnace Makes Thermocouple & RTD Calibration Affordable!
  • Inconel Radiation Shield Reduces Noise & Increases Uniformity!
  • Internal Equalization Block Produces Highly Stable & Uniform Temperature Field!
EDL's newly redesigned FUR-1200 High Temperature Calibration Furnace is ideal for the testing and calibration of thermocouples and RTDs. Comparison calibrations are easily performed between 300 °C and 1200 °C (with intermittent operation to 1250 °C). The internal Inconel equalization block produces a highly stable and uniform temperature field ideal for high accuracy calibration, long-term drift tests, and temperature cycle tests. The block's standard design is capable of accommodating up to 20 sensors and may be customized to meet your specific requirements. 

FUR-1200
High Temperature Calibration Furnace:

Temperature Range: 300 °C to 1200 °C (with intermittent operation to 1250 °C)
Length: ~ 61cm (24")
Width: ~ 51cm (20") 
Height: ~53cm ( 21") 
Weight: ~ 113kg (~250 lbs.)
Internal Equalization Block Length: ~20cm (8")
Minimum Use Temperature: 300 °C
Maximum Use Temperature: 1200 °C (with intermittent operation to 1250 °C)
Stability over 15 Min @ 300 °C: < 0.065 °C
Stability over 15 Min @ 815 °C: < 0.065 °C
Stability over 15 Min @ 1100 °C: < 0.065 °C
Three Zone Block Uniformity: < 0.25 °C
Heating Element: Wound, Non-Insulated
Insulation:  Low (K) Factor Vacuum Cast Ceramic; Alumina Tube with Ceramic Spacers
Inside Diameter: 7.2cm (2.8") 
Power Requirement: 230 VAC, 6400 Watts 
Current Rating: 20 A
Controller Power: 230 VAC
Control Thermocouple: (3) Thermocouples

**Installation is required**

Related Items

Information
Browse By Category